rusEFI project¶
Cranking¶
Cranking Coolant Temperature Multiplier
Cranking Settings¶
Enable cylinder cleanup: When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders.
Enable faster engine spin-up: Smarter cranking logic. See also startOfCrankingPrimingPulse
Use separate Advance Table for cranking: This activates a separate advance table for cranking conditions, this allows cranking advance to be RPM dependant.
Use Advance Corrections for cranking: This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).
Use fixed cranking dwell: If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.
Use separate Advance Table for cranking: This activates a separate advance table for cranking conditions, this allows cranking advance to be RPM dependant.
Use Advance Corrections for cranking: This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).
Use fixed cranking dwell: If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.
Use separate Advance Table for cranking: This activates a separate advance table for cranking conditions, this allows cranking advance to be RPM dependant.
Use Advance Corrections for cranking: This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).
Use fixed cranking dwell: If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.
Cranking Coolant Temperature Multiplier¶
Cranking Duration Multiplier¶
Cranking TPS Multiplier¶
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020