4chan F7 Initial Programming¶

One-time Setup¶

• Download and uncompress the bundle.

• Launch console/rusefi_console.exe

• Hit the 'install drivers' button on the top of the splash screen

For each board¶

• Power the 4chanF7 board while holding PROG button on 4chanF7. Windows should show "STM32 BOOTLOADER" device in device manager.

• In console\STM32_Programmer_CLI\bin folder, invoke stm32-reset-nDBANK.bat

• Hit the 'reset' button on 4chanF7 while holding PROG button on 4chanF7.

• In the console\STM32_Programmer_CLI\bin folder, invoke stm32-flash-dfu.bat

Expected result: the BLUE LED close to the STM32 MCU is constantly blinking.

Expected result: no RED LED next to the blinking BLUE LED.